Sony DVP-NS300, Operating Instructions Manual

Page: 63 / 76

S
e
tt
ings
a
nd Adjus
tme
nts
63
x DTS
Selects if DTS signals are output via the
DIGITAL OUT (COAXIAL) jack.
Notes
•
If you select one of the TVS settings while playing a
DVD, the player does not output the following
signals from the DIGITAL OUT (COAXIAL) jack.
•
Dolby Digital signals (when you set “DOLBY
DIGITAL” in “AUDIO SETUP” to “D-PCM”)
(page 62).
•
MPEG audio signals.
OFF Select this when the player is connected to
an audio component lacking a built-in
DTS decoder. Note, however, that the
DTS signals contained in a CD are output
even if “OFF” is selected.
ON Select this when the player is connected to
an audio component having a built-in
DTS decoder.
If the player is connected to an audio
component lacking a built-in DTS
decoder, do not set this. Otherwise, when
you play the DTS sound track, a loud
noise (or no sound) will come out from
the speakers, affecting your ears or
causing the speakers to be damaged.