Sony DVD115E Service Manual Download Page 195

Page: 195 / 195

Revision History

Reverse

DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ

Ver.

1.0

1.1

1.2

Date

2007.12

2008.01

2008.03

History

Official Release

Revised-1
(A1 DI07-262)

Revised-2
(A2 DI07-300)

Contents

—

Replace the previously issued SERVICE
MANUAL 9-852-249-51 with this Manual.
• Change of Automatic Adjustment Program

Version of Automatic Adjustment Program
has been changed from Ver_1.0r01 into
Ver_1.1r02.

• Correction of adjustment condition.
• Change of System requirements for using

AUDIT.

• Addition of Installation method for

“Audit for 2008”.

• Deletion of Installation Method.
S.M. revised:

Replace the previously issued SERVICE
MANUAL 9-852-249-52 with this Manual.
• Change of Automatic Adjustment Program

Version of Automatic Adjustment Program
has been changed from Ver_1.1r02 into
Ver_1.2r03.

S.M. revised:

Page 6-7

S.M. Rev.

issued

—

Yes

985224953.pdf

Summary of Contents for DVD115E




































































































































































































Search results

Summary of Contents for DVD115E

Reviews:

Sony DVD115E, Service Manual, Page: 195 / 195

Search results

Summary of Contents for DVD115E

Reviews: