21
Location and Function of Parts
C
h
ap
te
r 1
Ov
e
rv
ie
w
When in 2 CH (48 kHz) mode:
When in 4 CH (32 kHz) mode:
You can switch the audio recording mode with the REC
MODE menu item
. The selection is indicated
by the REC MODE display on the front panel.
2
Analog video/audio signal output section
a
VIDEO OUT connectors (BNC type)
There are the following VIDEO OUT connectors for
outputting analog video signals:
• Y/CPST
• R
−
Y/S
−
C
• B
−
Y/S
−
Y
• SUPER
The signals output from these connectors depend on the
setting of the VIDEO OUTPUT menu item
The setting is indicated by the VIDEO indicators in the
OUTPUT signal display section on the front panel.
The analog video signals that can be output from these
connectors are as follows.
When COMPOSITE/S VIDEO is selected:
* When the CHARA. DISPLAY menu item
(factory default setting), the SUPER connector outputs a composite
video signal with superimposed text information.
When Y
–
R, B is selected:
* When the CHARA. DISPLAY menu item
(factory default setting), the SUPER connector outputs a composite
video signal with superimposed text information.
b
AUDIO OUT 1/3 and AUDIO OUT 2/4 connectors
(XLR-3 pin, male)
These connectors output analog audio signals. The output
audio channels are determined by the playback audio mode
and the setting (1/2 CH or 3/4 CH) of the AUDIO
OUTPUT menu item
as follows.
Input
connectors
Audio channels on which input
signals are recorded
AUDIO IN 1/3
Audio channel 1
AUDIO IN 2/4
Audio channel 2
Input
connectors
Audio channels on which input
signals are recorded
AUDIO IN 1/3
Audio channels 1 and 3
AUDIO IN 2/4
Audio channels 2 and 4
VIDEO OUT
Y/CPST
R-Y/S-C
B-Y/S-Y
1/3
2/4
SUPER
AUDIO OUT
MONITOR
1
VIDEO OUT connectors
2
AUDIO OUT 1/3 and
AUDIO OUT 2/4
connectors
3
MONITOR
connector
Connectors
Output signals
Y/CPST
Composite signal
R
−
Y/S
−
C
S
−
C
B
−
Y/S
−
Y
S
−
Y
SUPER*
Composite signal
Connectors
Output signals
Y/CPST
Y signal
R
−
Y/S
−
C
R
−
Y signal
B
−
Y/S
−
Y
B
−
Y signal
SUPER*
Composite signal