14
GB
For Japanese cars, see “Mounting the unit in a
Japanese car” (page 14).
Mounting the unit with the supplied
mounting sleeve
Before installing, make sure the catches on both
sides of the mounting sleeve
are bent inwards
3.5 mm (
5
/
32
in).
1
Position the mounting sleeve
inside
the dashboard, then bend the claws
outward for a tight fit.
2
Mount the unit onto the mounting
sleeve
.
Note
If the catches are straight or bent outwards, the unit will
not be installed securely and may spring out.
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
When mounting this unit to the preinstalled
brackets of your car, use the mounting screws
in
the appropriate screw holes based on your car:
T for TOYOTA and N for NISSAN.
Note
To prevent malfunction, install only with the mounting
screws
.
For details, see “Resetting the Unit” (page 6).
When replacing the fuse, be sure
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
Mounting the unit in the dashboard
Larger than
182 mm (7
1
/
4
in)
Larger than
111 mm
(4
3
/
8
in)
Catch
Resetting the unit
Fuse replacement
To dashboard/center console
Parts supplied with
your car
Bracket
Bracket
Fuse (10 A)
