Sony DSX-A50BT, Operating Instructions Manual

Page: 28 / 224

28
Adjusting setup items
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the desired
item appears, then press it.
3
Rotate the control dial to select the
setting, then press it
* .
The setting is complete.
4
Press (BACK).
* For CLOCK-ADJ, BTM, BT INIT, BT SIGNL
and PAIRING settings, step 4 is not necessary.
The following items can be set depending
on the source and setting:
*1 When the unit is turned off.
*2 When FM is received.
CLOCK-ADJ (Clock Adjust) (page 7)
CT (Clock Time)
Activates the CT function: “ON,” “OFF”
(page 14).
BEEP
Activates the beep sound: “ON,” “OFF.”
CAUT ALM *
1
(Caution Alarm)
Activates the caution alarm: “ON,”
“OFF” (page 8).
AUX-A *
1
(AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 29).
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
DEMO (Demonstration)
Activates the demonstration: “ON,”
“OFF.”
DIMMER
Changes the display brightness: “ON,”
“OFF.”
AUTO SCR (Auto Scroll)
Scrolls long items automatically: “ON,”
“OFF.”
REGIONAL *
2
Restricts reception to a specific region:
“ON,” “OFF” (page 14).
REPEAT (page 16)
LOUDNESS
Reinforces bass and treble for clear
sound at low volume levels: “ON,”
“OFF.”
BTM (page 12)
BT INIT (Bluetooth Initialize)*
1
(page 26)
BT SIGNL (Bluetooth Signal)
Turns the Bluetooth signal on/off.
PAIRING
Turns the pairing mode on/off.
Memorizes the information between this
unit and the Bluetooth device.