Sony DSR-PD175P/PD177P Page 67 Operating Manual Download

Page: 67 / 128

sin

th
e

INT MIC NR

You can reduce noise from the internal
microphone.

Reduces noise from the internal
microphone.

appears on the status check screen.

OFF

Does not reduce noise from the internal
microphone.

INT MIC SENS

You can set recording sensitivity of the
internal microphone.

NORMAL

Sensitivity that is normally used in
professional recordings.

HIGH

Sensitivity that is normally used in
consumer recordings.

appears on the status check

screen.

INT MIC WIND

OFF

Disables wind noise reduction.

Enables wind noise reduction.

appears on the status check screen.

XLR AGC LINK

You can select either linked or separate
AGC (Auto Gain Control) of CH1 and CH2
when using an external microphone.

SEPARATE

Separately applies AGC for CH1/CH2.
Sound inputs from CH1/CH2 will be
recorded as separate sound.

LINKED

Applies the AGC of CH1 linked with that
of CH2. Sound inputs from CH1/CH2 will
be recorded as a set of sound such as stereo
sound.

appears on the status check

screen.

Notes

• This function is available when the CH1 and

CH2 switches are set to AUTO and the INPUT1
and INPUT2 switches are both set to MIC or
both set to LINE (p. 38).

AU.MAN GAIN

You can select either linked or separate
audio level control of CH1and CH2 when
using an external microphone.

SEPARATE

Separately controls the audio levels of
CH1 and CH2. Sound inputs from CH1
and CH2 will be recorded as separate
sound.

LINKED (

)

Controls the audio level of CH1 linked
with that of CH2. Sound inputs from CH1
and CH2 will be recorded as a set of sound
such as stereo sound.

appears on the

status check screen.

Notes

• This function is available when the CH1 and

CH2 switches are set to MAN and the INPUT1
and INPUT2 switches are both set to MIC or
both set to LINE (p. 38).

• When you select [LINKED], you can adjust the

volume with the AUDIO LEVEL dial of CH1
(p. 38).

INPUT1 MIC NR

You can reduce noise from the
microphone.

Reduces noise from the microphone.

appears on the status check screen.

OFF

Does not reduce noise from the
microphone.

INT MIC SET

XLR SET

Continued

Summary of Contents for DSR-PD175P/PD177P

































































































































Search results

Summary of Contents for DSR-PD175P/PD177P

Reviews:

Related manuals for DSR-PD175P/PD177P

Brands by name

Popular brands

Sony DSR-PD175P/PD177P, Operating Manual

Search results

Summary of Contents for DSR-PD175P/PD177P

Reviews:

Related manuals for DSR-PD175P/PD177P

Brands by name

Popular brands