118
Remove the insulation sheet before using
the Remote Commander.
A
PHOTO (22)
The on-screen image when you press this
button will be recorded onto the “Memory
Stick Duo” media as a still image.
B
Memory control buttons (Index, –/+,
Memory/playback) (45)
C
SEARCH M. (50)
D
.
>
E
Video control buttons (Rewind,
Playback, Fast-forward, Pause, Stop,
Slow) (45)
F
ZERO SET MEMORY
This button is invalid with your
camcorder.
G
Transmitter
H
START/STOP (20)
I
Power zoom (23)
J
b
Notes
• Aim the Remote Commander towards the
remote sensor to operate your camcorder.
• Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander
may not function properly.
• When you are operating with the Remote
Commander supplied with your camcorder,
your VCR may also operate. In that case, select
a commander mode other than VTR 2 for your
VCR, or cover the sensor of your VCR with
black paper.
To change the battery of the Remote
Commander
1
While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
2
Place a new battery with the + side facing
up.
3
Insert the battery case back into the Remote
Commander until it clicks.
• When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may
not function properly. In this case, replace the
battery with a Sony CR2025 lithium battery.
Use of another battery may present a risk of fire
or explosion.
Remote Commander
7
1
2
3
4
5
6
8
9
0
Insulation sheet
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in
fire.
Tab
Identifying parts and controls (Continued)
