HELP
DSC-T300_L2
cm
0
1
2
3
4
5
When soldering, print this sheet and use this as a
workbench for positioning.
Positioning sheet for soldering
the piezoelectric buzzer (SP901)
Note: Use this drawing in its actual scale.
If you cannot print this out in its actual scale, the PC
or printer setting is a probable cause.
In such a case, use a photocopier or another tool to
obtain the actual size.
Note: Be sure not to put the soldering height
higher than 0.7mm.
Edge of cavity
for speaker
0.1mm
NOTE ON PUTTING ADHESIVE SHEET (SP)
Adhesive sheet (SP)
BT holder assy
BT holder assy
Piezoelectric buzzer
(2.0cm)
Piezoelectric buzzer
(2.0cm)
MC-190 flexible board
MC-190 flexible board
Be careful not to put adhesive sheet (SP) out of cavity for speaker.
Adhesive sheet (SP)
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
