1-1
DSC-S800
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note:
When replacing the camera, erase the data in internal memory of the board before replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
1. SERVICE NOTE
1-1. PROCESS AFTER FIXING FLASH ERROR
Method for Initializing the Flash Error
1-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
Initializes the setting to the default setting.
Images stored in the internal memory are retained.
1
Select [OK] with
v
on the control button, then press
z
.
The message “Initialize all settings Ready?” appears.
2
Select [OK] with
v
, then press
z
.
The settings are reset to the default setting.
To cancel the resetting
Select [Cancel] in step
1
or
2
, then press
z
.
• Make sure that the power is not disconnected during resetting.
Initialize
Copies all images in the internal memory to a “Memory Stick Duo”.
1
Insert a “Memory Stick Duo” having 64 MB or larger capacity.
2
Select [OK] with
v
on the control button, then press
z
.
The message “All data in internal memory will be copied Ready?” appears.
3
Select [OK] with
v
, then press
z
.
Copying starts.
To cancel the copying
Select [Cancel] in step
2
or
3
, then press
z
.
• Use fully charged Nickel-Metal Hydride batteries or the AC Adaptor (not supplied). If you attempt to
copy image files using batteries with little remaining charge, the batteries may run out, causing copying to
fail or possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in
(Internal Memory Tool) .
• When you copy the data in the internal Memory to the “Memory Stick Duo”, all the data will be copied.
You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be
copied.
• Even if you copy data, a
(Print order) mark is not copied.
Copy
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1
Select [OK] with
v
on the control button, then press
z
.
The message “All data in internal memory will be erased Ready?” appears.
2
Select [OK] with
v
, then press
z
.
The format is complete.
To cancel the formatting
Select [Cancel] in step
1
or
2
, then press
z
.
Format
