When [
Shutter Type] is set to [Mechanical Shut.], the continuous shooting
speed cannot be set to [Continuous Shooting: Hi].
Hint
To hold the focus and exposure during burst, change the following settings.
Set [Focus Mode] to [Continuous AF].
Set [
AEL w/ shutter] to [Off] or [Auto].
[90] How to Use
Using shooting functions
Selecting a drive mode (Continuous
shooting/Self-timer)
Self-timer
Shoots an image using the self-timer after a designated number of seconds have
elapsed since the shutter button was pressed.
1. MENU
→
(Camera Settings)
→
[Drive Mode]
→
[Self-timer].
2. Select the desired mode using the right/left side of the control wheel.
Menu item details
Self-timer: 10 Sec:
Sets the 10-second delay self-timer.
When you press the shutter button, the self-timer lamp flashes, a beep sounds,
and the shutter operates after 10 seconds. To cancel the self-timer, press the
shutter button again.
Self-timer: 5 Sec:
Sets the 5-second delay self-timer.
When you press the shutter button, the self-timer lamp flashes, a beep sounds,
and the shutter operates after 5 seconds. To cancel the self-timer, press the
shutter button again.
Self-timer: 2 Sec:
Sets the 2-second delay self-timer. This reduces the camera-shake caused by
pressing the shutter button.
Hint
Press the
/
button of the control wheel and select
(Single Shooting)
