1. MENU
→
(Custom Settings)
→
[Custom Key(Shoot.)]
→
assign the [Eye
AF] function to the desired button.
2. Point the camera at a person's face, and press the button to which you have
assigned the [Eye AF] function.
3. Press the shutter button while pressing the button.
Hint
When the camera focuses on the eyes, a detection frame is displayed over the
eyes. If the focus mode is set to [Single-shot AF], the frame will disappear after
a period of time.
Note
The camera may not be able to focus on the eyes depending on the
circumstances, such as when no eyes can be detected within the auto focus
area. In such cases, the camera detects a face and focuses on the face.
If the camera cannot detect a person’s face, you cannot use [Eye AF].
Depending on the circumstances, you cannot use [Eye AF], such as when
[Focus Mode] is set to [Manual Focus], etc.
[Eye AF] may not function in the following situations:
When the person is wearing sunglasses.
When the front hair covers the person’s eyes.
In low-light or back-lit conditions.
When the eyes are closed.
When the person is in the shade.
When the person is out of focus.
When the person is moving too much.
If the person is moving too much, the detection frame may not display correctly
over their eyes.
[79] How to Use
Using shooting functions
Adjusting the focus
Phase Detect. Area
Sets whether or not to display the Phase Detection AF area.
