Sony DSC-RX0M2, Help Manual

Page: 74 / 299

Help Guide
Digital Still Camera
DSC-RX0M2
● button Tracking
When you press the (Enter) button, the camera detects the subject positioned in the center of the screen and
continues to track the subject.
Hint
If you assign the [Focus Standard] function to the (Enter) button, you can activate [ button Tracking] or retry detecting a
subject by pressing the (Enter) button when [Focus Area] is set to [Wide] or [Center].
Note
[ button Tracking] may not function very well in the following situations:
The subject is moving too quickly.
The subject is too small, or too large.
The contrast between the subject and the background is poor.
It is dark.
The ambient light changes.
[ button Tracking] does not work in the following situations:
When shooting in Manual Focus mode
While using the zoom function
During movie shooting
During High Frame Rate shooting
The camera may not be able to resume tracking for a while after it loses the track of the subject.
4-748-164-11(1) Copyright 2019 Sony Corporation
MENU → (Camera Settings1) → [ button Tracking] → [On].
1
Align the target frame (A) over the subject and press the (Enter) button.
Press the (Enter) button again to stop tracking.
If the camera loses track of the subject, it can detect when the subject reappears on the monitor and resume
tracking.
2
Press the SHUTTER/MOVIE button fully down to shoot the image.
3
74