Sony DSC-RX0M2, Help Manual

Page: 264 / 299

Help Guide
Digital Still Camera
DSC-RX0M2
Installing PlayMemories Home
Note
Log on as Administrator.
It may be necessary to restart your computer. When the restart confirmation message appears, restart the computer following the
instructions on the screen.
DirectX may be installed depending on your computer’s system environment.
Hint
For details on PlayMemories Home, refer to the Help of PlayMemories Home or the PlayMemories Home support page
(
https://www.sony.co.jp/pmh-se/ ) (English only).
Using your computer's Internet browser, go to the URL below and download PlayMemories Home by
following the on-screen instructions.
https://www.sony.net/pm/
An internet connection is required.
For detailed instructions, visit the PlayMemories Home support page.
https://www.sony.co.jp/pmh-se/
1
Connect the product to your computer using the micro USB cable (supplied), then turn the product on.
New functions may be added to PlayMemories Home. Even if PlayMemories Home has already been installed
on your computer, connect this product and your computer again.
Do not remove the micro USB cable (supplied) from the camera while the camera is in operation or the access
screen is displayed. Doing so may damage the data.
A: To the Multi/Micro USB Terminal
B: To the USB jack of the computer
2
264