Chapter 2
Names and Functions of Parts
2-12
Chapter 2
Names and Functions of Parts
6
MONITOR LEVEL knob
Adjusts the audio level of the headphones.
7
Monitor setting section
The buttons in this section allow you to select tracks to
monitor and the monitoring method.
SOLO RESET button: Cancels the solo function.
MONO button: The output from the MON OUT L/R
connectors of the AV I/O Block, the
HEADPHONES connector on the Main Unit, and
the HEADPHONES connector on this pannel
becomes monaural.
BANK button and indicators: For the audio signals
to monitor, selects and indicates channels 1 to 4 or
5 to 8.
Monitor channel selection buttons: After selecting
channels 1 to 4 or 5 to 8 with the BANK button,
press the 1/5, 2/6, 3/7, 4/8 buttons (L/R) to select
one or several channels.
8
MASTER fader
Uniformly adjusts the audio level of all tracks.
9
Channel faders 1 to 8
Individually adjust the audio levels of the audio input
source channel or timeline track.
Rear panel
HEADPHONES
MONITOR IN
MONITOR OUT
UPSTREAM PORT
USB
PORT 1
PORT 2
PORT 3
DC IN
1
HEADPHONES connector
1
HEADPHONES connector (stereo phone jack)
Connect headphones to monitor the audio signals
input to the MONITOR IN connector.
2
MONITOR IN connectors (RCA phono jack,
×
2)
Connect to the MON OUT L/R connectors of the AV
I/O Block.
3
MONITOR OUT connector (stereo minijack)
Outputs the signal input to the MONITOR IN
connector in a loop-through manner. You can connect
optional active speakers to this connector. Audio
signals are output to the MONITOR OUT connector
even when headphones are connected to the
HEADPHONES connector.
4
UPSTREAM PORT connector (USB)
Connect to the Main Unit or to the Jog & Shuttle
Control Panel connected to the Main Unit using a USB
cable.
2
MONITOR IN connectors
3
MONITOR OUT connector
4
UPSTREAM PORT connector
5
USB PORT 1 to USB PORT 3
connectors
6
DC IN connector
2-2
Control Panels
