Sony Digital Duplicator Operating Instructions Manual Download Page 31

Page: 31 / 84

Ge
tting Star

Press AMP MENU.

Press AUTO CAL.

Measurement starts in 5 seconds and the
display changes as follows:
A.CAL [5]

A.CAL [4]

A.CAL [3]

A.CAL [2]

A.CAL [1]

While the time is counting down, stand
away from the measurement area to avoid
measurement error.

Measurement starts.

The measurement process will take a few
minutes to complete.

The table below shows the display when
measurement starts.

* The corresponding speaker indicator lights

up in the display during measurement.

Measurement ends.

“COMPLETE” appears on the display
and the settings are registered.

After you have finished

Disconnect the optimizer microphone from the
AUTO CAL MIC jack.

Notes

• Auto Calibration cannot detect the subwoofer.

Therefore, the subwoofer settings will be
maintained.

• If you have changed the position of the speakers, it

is recommended that you perform Auto Calibration
again to enjoy the surround sound.

• You cannot select Auto Calibration when the

headphones are connected.

Tips

• When Auto Calibration starts:

– Stand some distance away from the speakers and

the listening position to avoid measurement
failure. This is because test signals are output
from the speakers during measurement.

– Avoid making noise to get a more accurate

measurement.

• The Auto Calibration function will be canceled

when you do the following during the
measurement process:
– Press

or MUTING.

– Press the input buttons or turn the INPUT

SELECTOR on the receiver.

– Change the volume level.
– Connect the headphones.
– Press AUTO CAL again.

Performing Auto Calibration

0/10

ENTER

SYSTEM STANDBY

TV INPUT

SLEEP

DMPORT

VIDEO1

VIDEO2

DVD

2CH

A.F.D.

RETURN/EXIT

TV CH –

PRESET –

TV CH +

REPLAY ADVANCE

MOVIE

MUSIC

AMP MENU

CLEAR

DISPLAY

TV VOL

MASTER VOL

DVD/BD

MENU

AUTO CAL

D.TUNING

D.SKIP

THEATRE

SAT

SA-CD/CD TUNER

?/1

>10

?/1

MEMORY

MENU/HOME

MUTING

TOOLS/
OPTIONS

Input

buttons

switch

MUTING

MASTER
VOL +/–

Measurement for Display

Environment noise
level

NOISE.CHK

Speaker connection

MEASURE and SP
DET. appears
alternately*

Speaker level

MEASURE and GAIN
appears alternately*

Speaker distance

MEASURE and
DISTANCE appears
alternately*

Summary of Contents for Digital Duplicator





















































































Search results

Summary of Contents for Digital Duplicator

Reviews:

Related manuals for Digital Duplicator

Brands by name

Popular brands

Sony Digital Duplicator, Operating Instructions Manual

Search results

Summary of Contents for Digital Duplicator

Reviews:

Related manuals for Digital Duplicator

Brands by name

Popular brands