
O
p
tion
al Co
mpon
ents
81
GB
1
Connect a digital optical cord.
See “Hooking up optional components” on
page 79.
2
Connect 6 speakers to an AV amplifier
equipped with a decoder.
For the speaker placement, refer to the
operating instructions supplied with the
connected amplifier.
3
Switch the output to 5.1 channel Dolby
Digital sound or 5.1 channel DTS
sound.
See “Changing the sound” on page 39.
Tip
You cannot use the surround effect of this system.
1
Connect audio cords.
See “Hooking up optional components” on
page 79.
2
Start recording manually.
See “Recording on a tape manually” on
page 59.
Making an analog recording
1
Connect audio cords.
See “Hooking up optional components” on
page 79.
2
Start recording.
Refer to the operating instructions provided
with the connected component.
Making an analog recording
from a VIDEO CD to a video
tape
1
Connect optional audio cords from the
VIDEO/SAT OUT L/R (audio) jacks and
the supplied video cable from the
VIDEO OUT jack to your VCR.
2
Start recording.
Refer to the operating instructions provided
with the connected component.
Note
When you connect the system to the TV and VCR, you
may experience video leakage or hear noise. In this
case, disconnect one of the components.
Enjoying the 5.1 channel
sound with the optional
amplifier
(DHC-AZ3DM only)
Recording audio from a
connected component
Recording on a connected
component