
Time
r
67
GB
8
Press ENTER.
The type of timer (“PLAY TIMER”), the
start time, the stop time, and the sound
source appear in turn, before the original
display returns.
9
Press
?/1
to turn off the system.
Other operations
Notes
• You cannot activate the Play Timer and Rec Timer at
the same time.
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The system turns on 30 seconds before the preset
time. Do not operate the system from the time the
system turns on until the play starts.
• The Play Timer will not be activated when the
following occurs 30 seconds before the preset time.
– The system is turned on.
– “STANDBY” is blinking in the display.
• You cannot use the optional component connected to
VIDEO/SAT IN L/R jacks, PC port or USB
MEMORY port as the sound source for Play Timer.
You can record a preset radio station from a
specified time.
To timer record, you must first preset the radio
station (see “Presetting radio stations” on
page 54) and set the clock (see “Setting the
clock” on page 13).
Use buttons on the remote for the operation.
1
Tune in the preset radio station (see
“Listening to a preset station” on
page 55).
2
Press TIMER MENU.
3
Press
M
or
m
repeatedly to select “REC
SET?”, then press ENTER.
“ON” appears and the hour indication
flashes.
4
Set the time to start recording.
Press
M
or
m
repeatedly to set the hour, then
press
,
.
The minute indication flashes.
Press
M
or
m
repeatedly to set the minute,
then press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
The type of timer (“REC”), the start time,
the stop time, and the preset radio station to
be recorded (e.g., “FM 5”) appear in turn,
before the original display returns.
6
Load a recordable tape into the tape
deck.
7
Press
?/1
to turn off the system.
To
Do this
Check the setting
1
Press TIMER MENU.
2
Press
M
or
m
repeatedly
until “TIMER SEL?”
appears, then press ENTER.
3
Press
M
or
m
repeatedly
until “PLAY SELECT?”
appears, then press ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press TIMER MENU.
2
Press
M
or
m
repeatedly until
“TIMER SEL?” appears,
then press ENTER.
3
Press
M
or
m
repeatedly
until “TIMER OFF?”
appears, then press ENTER.
Timer recording radio
programs
— Rec Timer
continued