46
GB
Notes
• When you set the item to “AUTO”, the language may
change. The “TRACK SELECTION” setting has
higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 42). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound and MPEG
audio tracks in this order.
x
MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory for up to 40 different DVD VIDEO/
VIDEO CD discs (page 23).
The default setting is underlined.
x
AUDIO DRC (Dynamic Range
Compression) (DVD VIDEO/DVD-RW only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
The default setting is underlined.
Note
“AUDIO DRC” only applies to Dolby Digital sources.
x
DivX
Displays the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.
To obtain the best possible surround sound, set
for the size of the speakers you have connected
and their distance from your listening position.
Then use the test tone to adjust the level of the
speakers to the same level.
Select “SPEAKER SETUP” in the Setup
Display.
To use the Setup Display, see “Using the Setup
Display” (page 41).
Note
You cannot operate these setup items when you
connect headphones and microphones to the system.
To return to the default setting
Select the item, then press CLEAR. Note that
only the “SIZE” setting does not return to the
default setting.
ON
Stores the resume settings in
memory for up to 40 discs.
OFF
Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the system.
OFF
No compression of dynamic
range.
STANDARD
Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
MAX
Compresses dynamic range at the
maximum.
Speaker settings
— SPEAKER SETUP (DHC-AZ7DM
only)