Sony DG510 - STR AV Receiver, Operating Instructions Manual

Page: 68 / 72

68 GB
Models of area code KR
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
85 W + 85 W
1)
70 W + 70 W
3)
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
100 W + 100 W
1)
90 W + 90 W
3)
Surround Mode Output Power
2)
(8 ohms, 1 kHz,
THD 10%)
130 W/ch
1)
120 W/ch
3)
Models of area code TH6
Minimum RMS Output Power (8 ohms, 20 Hz –
20 kHz, THD 0.09%)
70 W + 70 W
1)
60 W + 60 W
3)
Stereo Mode Output Power (8 ohms, 1 kHz,
THD 1%)
80 W + 80 W
1)
70 W + 70 W
3)
Surround Mode Output Power
2)
(8 ohms, 1 kHz,
THD 10%)
120 W/ch
1)
100 W/ch
3)
1)
Measured under the following conditions:
2)
Reference power output for front, center and
surround speakers. Depending on the sound field
settings and the source, there may be no sound
output.
3)
Measured under the following conditions:
Frequency response
Analog 10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
Inputs
Analog Sensitivity: 500 mV/
50 kohms
S/N
4)
: 96 dB
(A, 500 mV
5)
)
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT Voltage: 500 mV/10
kohms
SUB WOOFER Voltage: 2 V/1 kohm
Tone
Gain levels ±6 dB, 1 dB step
4)
INPUT SHORT (with sound field and tone
bypassed).
5)
Weighted network, input level.
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Antenna Loop antenna
Intermediate frequency
450 kHz
Area code Power requirements
U, CA 120 V AC, 60 Hz
CEL, CEK, KR,
TH6, SP 230 V AC, 50 Hz
E2, AU 240 V AC, 50 Hz
TW 110 V AC, 60 Hz
Area code Power requirements
KR, TH6 220 V AC, 50 Hz
Area code Tuning scale
10 kHz step 9 kHz step
U, CA 530 –
1,710 kHz
6)
531 –
1,710 kHz
6)
CEL, CEK, AU, TW,
KR, TH6, SP – 531 –
1,602 kHz
E2 530 –
1,610 kHz
6)
531 –
1,602 kHz
6)