7
Ge
tt
in
g
S
ta
rte
d
You can charge the “InfoLITHIUM”
battery pack (H series) after attaching
it to your camcorder.
• Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
1
Attach the battery pack by sliding
it in the direction of the arrow until
it clicks.
2
Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(The default setting).
3
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the
v
mark on the DC plug
is facing up.
4
Connect the mains lead to the AC
Adaptor and the wall socket.
5
Set the camcorder onto the
Handycam Station securely.
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery pack is fully
charged. Remove the camcorder from the
Handycam Station.
To remove the battery pack
Turn the POWER switch to OFF (CHG).
Slide the BATT (battery) release lever and
remove the battery pack.
• When you remove the battery pack or the AC
Adaptor, make sure that the
(Movie) lamp/
(Still) lamp (p.9) is turned off.
Step 2: Charging the battery pack
POWER
switch
CHG
lamp
DC IN jack
DC plug
AC Adaptor
Mains lead
To the
wall socket
Battery pack
BATT (battery)
release lever
