Sony DCR-VX2200E Operating Manual Download

Page: 12 / 112

Step 3: Charging the battery pack

You can charge the “InfoLITHIUM”
battery pack (L series) with the
supplied AC Adaptor.

Notes

• You cannot use batteries other than the

“InfoLITHIUM” battery pack (L series) (p. 91).

Press the battery pack against the
back of your camcorder and slide
it down.

With the

mark on the DC plug

facing outwards, connect the DC
plug to the DC IN jack on your
camcorder.

Connect the power cord (mains
lead) to the AC Adaptor.

Connect the power cord (mains
lead) to the wall outlet (wall
socket).

Set the POWER switch to

OFF (CHG).

The CHG lamp lights up and charging
starts.

DC IN jack

DC plug

AC Adaptor

Power cord (mains lead)

To the wall outlet
(wall socket)

mark

Summary of Contents for DCR-VX2200E

















































































































Search results

Summary of Contents for DCR-VX2200E

Reviews:

Related manuals for DCR-VX2200E

Brands by name

Popular brands

Sony DCR-VX2200E, Operating Manual

Search results

Summary of Contents for DCR-VX2200E

Reviews:

Related manuals for DCR-VX2200E

Brands by name

Popular brands