84
You can duplicate selected scenes (programs) for editing onto the tape without
operating the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Your camcorder can dub on the “Memory Stick” (DCR-TRV22/TRV33 only). See page
130 for details.
Before operating Digital program editing on the tape recorded
on other equipment
Step
1
Connecting to the VCR.
Step
2
Setting the VCR to operate (p. 85).
Step
3
Adjusting the synchronization of the VCR (p. 88).
When you dub using the same VCR again, you can skip steps 2 and 3.
Using Digital program editing on the tape recorded on other
equipment
Operation
1
Making a program (p. 90).
Operation
2
Performing Digital program editing (Dubbing the tape) (p. 92).
Note
When editing digital video, the operation signals to the VCR cannot be sent with
LANC jack.
Step 1: Connecting to the VCR
You can connect either the A/V connecting cable or the i.LINK cable.
Connect the devices as illustrated on page 81.
Dubbing only desired scenes
– Digital program editing (on tape)
Unwanted
scene
Unwanted
scene
Switch the order
