69
Advanced Recording Operations
You can make a recording with a stop-motion animated effect using frame recording.
To create this effect, alternately move the subject a little and make frame recording. We
recommend that you use a tripod, and operate your camcorder using the Remote
Commander to avoid camera-shake.
The POWER switch should be set to
.
Operate by touching the panel.
(
1
)
Press FN to display PAGE1.
(
2
)
Press MENU to display the menu.
(
3
)
Select FRAME REC in
, then press EXEC (p. 182).
(
4
)
Select ON, then press EXEC.
(
5
)
Press EXIT to return to FN.
The FRAME REC indicator lights up.
(
6
)
Press START/STOP to start frame recording. Your camcorder makes a
recording for about 6 frames, and returns to recording standby.
(
7
)
Move the subject, and repeat step 6.
To cancel frame recording
Set FRAME REC to OFF in the menu settings.
Note
The proper remaining tape time is not indicated if you use frame recording
continuously.
When using frame recording
The last recorded frame is longer than other frames.
Frame by frame recording
– Frame recording
TAPE SET
REC MODE
AUDIO MODE
REMAIN
FRAME REC
INT. REC
EXIT
RET.
EXEC
OFF
ON
