114
The POWER switch should be set to
.
(
1
)
Keep pressing PHOTO lightly and check the image. The green
z
indicator
stops flashing, then lights up. The brightness of the image and the focus are
adjusted and fixed while your camcorder targets at the center of the image.
Recording does not start yet.
(
2
)
Press PHOTO deeply.
Recording is complete when the bar scroll indicator disappears.
The image displayed on the screen when you pressed PHOTO deeply will be
recorded on the “Memory Stick.”
[
a
]
Approximate number of images that can be recorded on the “Memory
Stick”
[
b
]
Folder name to be recorded in
Note
The recordable number of the images indicated on the screen depends on the setting of
the image quality and the condition of the subject being recorded. Therefore, the
recordable number may not change even after recording has been done.
You can record still images on the “Memory Stick” during tape recording or tape
recording standby
See page 46 for details.
Recording still images on “Memory
Stick” – Memory Photo recording
1
2
101
FINE
640
50min
101
12
FINE
640
50min
[
a
]
[
b
]
