Table of c
on
ten
ts
U
seful r
ec
or
ding t
echniques
Inde
x
US
OTHER SETTINGS
DEMO MODE
When your camcorder is connected to a
wall outlet (wall socket), a demonstration
movie appear about 10 minutes after the
(Movie) icon appears by pressing
MODE.
ON
The demonstration appears.
OFF
The demonstration does not appear.
Tips
When you set this item to [ON] and select
, the demonstration starts playing.
The demonstration will be suspended:
When you press START/STOP
When you operate the multi-selector during
the demonstration (The demonstration starts
again after about 10 minutes)
When you press MODE
When you press
(VIEW IMAGES)
USB LUN SETTING
You can set the compatibility of your
camcorder when using a USB connection.
MULTI
Default setting.
SINGLE
Set this if you cannot connect.
Notes
Set to [MULTI] when using the PMB Portable.
DROP SENSOR (DCR-SR21)
Your camcorder detects that it is dropping,
and protects the internal hard disk.
ON
Activates the drop sensor. When it is detected
that the camcorder is dropping, you may
not be able to record or play back images
correctly, to protect the internal hard disk.
When dropping is detected, appears.
OFF (
)
Deactivates the drop sensor.
Notes
Set the drop sensor to [ON] when you use
the camcorder. Otherwise, if you drop the
camcorder, you may damage the internal hard
disk.
In a non-gravity situation, the drop sensor
activates. When you record images during an
activity such as roller-coasting or skydiving, you
can set [DROP SENSOR] to [OFF] so as not to
activate the drop sensor.
