Sony DCR-PC350 - Digital Handycam Camcorder Operation Manual Download

Page: 144 / 152

Quick Reference

144

Remote Commander

Remove the insulation sheet before using the
Remote Commander.

PHOTO button (p. 31)

Memory control buttons (Index*, –/+,
Memory playback) (p. 53)

SEARCH M. button* (p. 61, 62)

buttons* (p. 61, 62)

Video control buttons (Rewind,
Playback, Fast-forward, Pause, Stop,
Slow) (p. 51)

ZERO SET MEMORY button* (p. 61)

Transmitter
After turning on your camcorder, point
towards the remote sensor to control your
camcorder.

REC START/STOP button (p. 29)

Power zoom button (p. 28)

DISPLAY button (p. 61)

* These buttons are not available during Easy

Handycam operation.

To remove the insulation sheet

To change the battery

While pressing on the tab, inset your
fingernail into the slit to pull out the
battery case.

Remove the button-type lithium battery.

Place a new button-type lithium battery
with the + side facing up.

Insert the battery case back into the
Remote Commander until it clicks.

Insulation sheet

Tab

Summary of Contents for DCR-PC350 - Digital Handycam Camcorder

























































































































































Search results

Summary of Contents for DCR-PC350 - Digital Handycam Camcorder

Reviews:

Related manuals for DCR-PC350 - Digital Handycam Camcorder

Brands by name

Popular brands

Sony DCR-PC350 - Digital Handycam Camcorder, Operation Manual

Search results

Summary of Contents for DCR-PC350 - Digital Handycam Camcorder

Reviews:

Related manuals for DCR-PC350 - Digital Handycam Camcorder

Brands by name

Popular brands