37
U
sin
g
th
e
M
e
n
u
3
Touch [
].
flashes quickly. When the white
balance has been adjusted and stored in
the memory, the indicator stops
flashing.
b
Notes
• Set [WHITE BAL.] to [AUTO] or [ONE PUSH]
under white or cool white fluorescent lamps.
• When you select [ONE PUSH], keep framing
white object while
is flashing quickly.
•
flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if
keeps
flashing after touching
, set [WHITE BAL.]
to [AUTO].
• If you set [WHITE BAL.], [SCENE SELECT]
is set to [AUTO].
z
Tips
• If you have changed the battery pack while
[AUTO] was selected, or taken your camcorder
outdoors after inside use with the [EXPOSURE]
set (or vice versa), select [AUTO] and aim your
camcorder at a nearby white object for about 10
seconds for better color balance adjustment.
• When the white balance has been set with [ONE
PUSH], if you change the [SCENE SELECT]
settings, or bring your camcorder outdoors from
inside the house, or vice versa, you need to redo
the [ONE PUSH] procedure to readjust the
white balance.
When you set [AUTOSLW SHTR] to
[ON], the shutter speed is slowed down
automatically to 1/25 in dark places.
You can select and adjust the focal point to
a subject not located in the center of the
screen.
1
Touch the subject on the screen.
9
appears.
2
Touch [END].
To adjust the focus automatically, touch
[AUTO]
t
[END].
b
Notes
• If you set [SPOT FOCUS], [FOCUS] is
automatically set to [MANUAL].
You can adjust the focus manually. You can
select this function also when you want to
focus on a certain subject intentionally.
1
Touch [MANUAL].
9
appears.
2
Touch
(focusing on close subjects)/
(focusing on distant subjects) to
sharpen the focus.
appears when the
focus cannot be adjusted any closer, and
appears when the focus cannot be adjusted
farther away.
3
Touch .
To adjust the focus automatically, touch
[AUTO]
t
.
b
Notes
• The minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
z
Tips
• It is easier to focus on the subject by moving the
power zoom lever towards T (Telephoto) to
adjust the focus, then towards W (Wide angle)
to adjust the zoom for recording. When you
want to record a subject at close range, move the
power zoom lever to W (Wide angle), then
adjust the focus.
AUTOSLW SHTR (Auto Slow
Shutter)
SPOT FOCUS
1
2
FOCUS
Continued
,
Summary of Contents for DCR HC62E - Mini DV Camcorder
Page 97: ...97 Quick Reference Write protect tab 77 Z Zero set memory 28 Zoom 22 ...
Page 98: ......
Page 99: ......