Sony DCR HC62E - Mini DV Camcorder Operating Manual Download

Page: 10 / 100

Step 2: Charging the battery pack

You can charge the “InfoLITHIUM”
battery pack (H series) (p. 79) after
attaching it to your camcorder.

Notes

• You cannot attach any “InfoLITHIUM” battery

pack other than the H series to your camcorder.

Align the terminals of the battery
pack and your camcorder

, then

attach the battery pack and click
it into place

Slide the POWER switch in the
direction of the arrow to
OFF(CHG) (The default setting).

With the

mark on the DC plug

facing down, connect the AC
Adaptor to the DC IN jack on your
camcorder.

Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).

The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery is fully
charged. Disconnect the AC Adaptor
from the DC IN jack.

Notes

• Disconnect the AC Adaptor from the DC IN

jack holding both the camcorder and the DC
plug.

POWER switch

DC IN jack

DC plug

AC Adaptor

To the wall outlet
(wall socket)

Battery pack

Power cord (Mains lead)

CHG (charge) lamp

Summary of Contents for DCR HC62E - Mini DV Camcorder





































































































Search results

Summary of Contents for DCR HC62E - Mini DV Camcorder

Reviews:

Related manuals for DCR HC62E - Mini DV Camcorder

Brands by name

Popular brands

Sony DCR HC62E - Mini DV Camcorder, Operating Manual

Search results

Summary of Contents for DCR HC62E - Mini DV Camcorder

Reviews:

Related manuals for DCR HC62E - Mini DV Camcorder

Brands by name

Popular brands