Sony DCR-DVD705E, Operating Manual, Page: 29 / 152

29
Ge
tt
in
g
S
ta
rte
d
• After your camcorder recognizes the disc, disc
information such as the date you started to use it
and information on previously recorded areas
appears for about 8 seconds. The information on
previously recorded areas may not be displayed
correctly depending on the condition of the disc.
• To delete all of the previously recorded pictures
from a DVD-RW/DVD+RW, then to use it again
to record new pictures, see “Deleting all of the
scenes on the disc (Formatting)” on page 62.
You can use only a “Memory Stick Duo”
marked with
or
(p.133).
• The number of recordable pictures varies
depending on the image quality or the image size.
For details, see page 74.
1
Open the Memory Stick Duo cover.
2
Insert the “Memory Stick Duo” into
the Memory Stick Duo slot in the
right direction until it clicks.
• If you force the “Memory Stick Duo” into the
slot in the wrong direction, the Memory Stick
Duo slot, or image data may be damaged.
3
Close the Memory Stick Duo cover.
To eject a “Memory Stick Duo”
Lightly push the “Memory Stick Duo” after
step
2 .
• When the ACCESS lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off, eject
the “Memory Stick Duo,” or remove the battery
pack. Otherwise, image data may be damaged.
• Make sure that the “Memory Stick Duo” does not
pop up and drop off when inserting and removing
it from your camcorder.
Inserting a “Memory Stick Duo”
(DCR-DVD304E/DVD305E/
DVD755E)
ACCESS lamp (“Memory Stick Duo”)