Sony DAV-SR2 Operating Instructions Manual Download

Page: 19 / 100

Ge
tting Star

Required cords

Video cord for connecting a TV

Audio cords (not supplied)

When connecting a cord, be sure to match the color-coded sleeves to the appropriate jacks on the
components.

Terminals for connecting video components

Notes

• The video signal is output as below:

– When [COMPONENT OUT] is set to [INTERLACE] in [SCREEN SETUP] (page 73) (default)

The video signal is output from the S VIDEO and VIDEO jacks of MONITOR OUT.

– When [COMPONENT OUT] is set to [PROGRESSIVE] in [SCREEN SETUP] (page 73)

The video signal is output from the COMPONENT VIDEO OUT jacks only.

• When you connect a VCR or digital satellite receiver to the VIDEO/SAT jacks of this system, change the function

to VIDEO or SAT (page 65).

Tips

• When using the S video jack instead of the video jacks, your TV monitor must also be connected via an S video

jack. S video signals are on a separate bus from the video signals and will not be output through the video jacks.

• When using the COMPONENT VIDEO OUT jacks (Y, P

, P

) instead of the video jacks, your TV monitor

must also be connected via COMPONENT VIDEO OUT jacks (Y, P

, P

). If your TV accepts progressive

format signals, you must use this connection and set [COMPONENT OUT] to [PROGRESSIVE] in [SCREEN
SETUP] (page 73).

Step 3: TV and Video Component Hookups

Connect the

To the

TV (VIDEO IN)

MONITOR OUT (VIDEO) jack

VCR (AUDIO OUT)

VIDEO (AUDIO IN) jacks

Digital satellite receiver
(AUDIO OUT)

SAT (AUDIO IN) jacks

Yellow

White (L/audio)

Red (R/audio)

continued

Summary of Contents for DAV-SR2





































































































Search results

Summary of Contents for DAV-SR2

Reviews:

Related manuals for DAV-SR2

Brands by name

Popular brands

Sony DAV-SR2, Operating Instructions Manual

Search results

Summary of Contents for DAV-SR2

Reviews:

Related manuals for DAV-SR2

Brands by name

Popular brands