background image

42

GB

Tips

• When playing VIDEO CDs with PBC functions, only 

the playing time of the scene is displayed.

• The playing time and remaining time of the current 

chapter, title, track, scene, or disc will also appear on 
your TV screen. See the following section “Checking 
the Playing Time and Remaining Time” for details on 
how to read this information.

Checking the Playing Time 
and Remaining Time

You can check the playing time and remaining 
time of the current title, chapter, or track, and the 
total playing time or remaining time of the disc. 
You can also check the DVD/CD/Super Audio 
CD text and MP3 folder name/file name/ID3 tag 
(only song title) recorded on the disc.

1

Press DVD DISPLAY during playback.

The Control Menu appears.

2

Press DISPLAY repeatedly to change 
the time information.

The display and the kinds of time that you 
can check depend on the disc you are 
playing.

x

When playing a DVD

• T **:**:**

Playing time of the current title

• T–**:**:**

Remaining time of the current title

• C **:**:**

Playing time of the current chapter

4

5

8

0

6

7

10

9

DISPLAY

DVD 
DISPLAY

DVD

1 2 ( 2 7 ) TITLE12

1 8 ( 3 4 )
T       1 : 3 2 : 5 5

DVD

Time information

Disc type

Summary of Contents for DAV-SB300

























































































Reviews: