background image

Getting Star

ted

11

GB

Check that you have the following items:

• Speakers (5)

• Subwoofer (1)

• AM loop antenna (aerial) (1)

• FM wire antenna (aerial) (1)

• Speaker cords (3.5m 

×

 3, 10m 

×

 2) 

• Video cord (1)

• Remote Commander (remote) RM-SP240 (1)

• Size AA (R6) batteries (2)

• Foot pads (4)

• Operating Instructions

• Speakers-connection and Installation (card) 

(1)

You can control the system using the supplied 
remote. Insert two size AA (R6) batteries by 
matching the 

3

 and 

#

 ends on the batteries to 

the markings inside the compartment. When 
using the remote, point it at the remote sensor 

 

on the system.

Notes

• Do not leave the remote in an extremely hot or humid 

place. 

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing, 

particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from 

the sun or lighting apparatus. Doing so may cause a 
malfunction. 

• If you do not use the remote for an extended period of 

time, remove the batteries to avoid possible damage 
from battery leakage and corrosion.

Getting Started

Unpacking

Inserting Batteries into 
the Remote

Summary of Contents for DAV-SB300

























































































Reviews: