Ad
dition
al I
n
fo
rm
atio
n
109
GB
Center
Speaker system
Closed, magnetically
shielded
Speaker unit
Woofer: 70 × 120 mm
dia. cone type
Tweeter: 25 mm dome
type
Rated impedance
4.0 ohms
Dimensions (approx.)
545 × 105 × 35 mm
(w/h/d)
545 × 116 × 60 mm
(w/h/d) with stand
Mass (approx.)
1.9 kg
2.1 kg with stand
Subwoofer
Speaker system
Bass reflex, magnetically
shielded
Speaker unit
150 mm cone type
Rated impedance
1.5 ohms
Dimensions (approx.)
188 × 573 × 318 mm
(w/h/d)
Mass (approx.)
14.5 kg
Power requirements
220 – 240 V AC, 50/60 Hz
Power consumption
130 W
0.3 W (at the Power Saving
mode)
Control unit
Dimensions (approx.)
570 × 168 × 56 mm
(w/h/d)
570 × 188 × 99 mm
(w/h/d) with stand
Mass (approx.)
4.2 kg
4.7 kg with stand
AC adaptor
Power requirements
220 – 240 V AC, 50/60 Hz
Power consumption
45 W
Dimensions (approx.)
219 × 44 × 82 mm
(w/h/d)
Mass (approx.)
0.7 kg
Design and specifications are subject to change
without notice.
Unpacking
• Control unit (1)
• Speakers (5)
• Subwoofer (1)
• AC adaptor (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (5 m
×
2, 3.5 m
×
1, 10 m
×
1)
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Posts (4)
• Bases (4)
• Speaker adaptors (4)
• Speaker adaptor covers (4)
• Cord clamp (1)
• Adjuster (1)
• Center speaker base (1)
• Control unit stand (1)
• Control unit stand cover (1)
• Screws (24)
• IR transmitter (1)*
• IR receiver (1)**
• IR receiver stand (1)**
• Operating Instructions
• Quick Start Guide (card) (1)
* The IR receiver cord and IR transmitter are for this
system only. You cannot use a commercially
available extension cord.
** Used when the IR receiver of the surround speaker
(L) cannot receive infrared ray because of the
position. For details, see “Using the IR Receiver”
(page 32).
Summary of Contents for DAV-LF1H
Page 127: ......
