10
GB
Gettin
g
Star
ted
Step 1: Installing the System
For the best possible surround sound, place all speakers at the same distance from the listening position
(
A
). The distance can be between 0.0 to 7.0 meters.
If you cannot place the center speaker and surround speakers at the same distance as (
A
), place them
within 7.0 meters of the listening position.
The subwoofers can be placed anywhere in the room.
Since the system is equipped with S-Force PRO Front Surround technology (page 104), you can enjoy
surround sound with the speakers in front of the listening position.
Note
• Be sure to connect the two front speakers.
• Install the speakers as in the illustration above. Otherwise, you will not achieve proper surround sound.
• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed,
oiled, polished, etc.) floor, as staining or discoloration may result.
• Do not lean or hang on a speaker, as it may fall down.
Tip
• Since the system is equipped with S-Force PRO Front Surround technology (page 104), you can enjoy surround
sound with the speaker positions illustrated above.
To obtain the S-Force PRO Front Surround, do all the following:
– set [ALL FRONT] or [ALL FRONT - NO CENTER] in the [SPEAKER FORMATION] setting (page 75).
– set the decoding mode to “A.F.D. MULTI” (page 26).
Positioning the system
A
A
A
Front left speakers (L) /
Surround left speaker (L)
Center speaker
Subwoofer left
Subwoofer right
Front right speakers (R)/
Surround right speaker (R)
