80
US
Choose settings according to the TV to be
connected.
Select [SCREEN SETUP] in the Setup Display.
To use the display, see “Using the Setup
Display” (page 78).
The default settings are underlined.
x
[TV TYPE]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
The default setting varies, depending on the
country model.
Note
• Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
x
[HDMI RESOLUTION]
Selects the type of video signals output from the
HDMI OUT (high-definition multimedia
interface out) jack. When you select [AUTO]
(default), the system outputs video signals of the
highest resolution acceptable for your TV.
If the picture is not clear, natural or to your
satisfaction, try another option that suits the disc
and your TV/projector, etc. For details, refer
also to the instruction manual supplied with the
TV/projector, etc.
* i: interlace, p: progressive
** Depending on the country, [720 × 480/576p] may
appear.
Note
• Even when a setting other than [AUTO] is selected
and the connected TV cannot accept the resolution,
the system automatically adjusts the video signals
that are suitable for the TV.
• When the HDMI indicator on the front panel lights
up, images from the S VIDEO OUT jack is enlarged
vertically. (Except when [720 × 480p] is selected.)
x
[YC
B
C
R
/RGB (HDMI)]
Selects the type of HDMI signal output from
HDMI OUT jack.
Settings for the Display
[SCREEN SETUP]
[4:3 LETTER
BOX]
Select this when you connect a 4:3
screen TV. Displays a wide picture
with bands on the upper and lower
portions of the screen.
[4:3 PAN SCAN]
Select this when you connect a 4:3
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the portions
that do not fit.
[16:9]
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
SCREEN SETUP
TV TYPE:
HDMI RESOLUTION:
YC
B
C
R
/RGB (HDMI):
16:9
AUTO
YC
B
C
R
SCREEN SAVER:
ON
JACKET PICTURE
BACKGROUND:
BLACK LEVEL:
ON
OFF
BLACK LEVEL
(COMPONENT OUT):
FULL
4:3 OUTPUT:
[AUTO]
Normally, select this.
[1920
×
1080i
*
]
Sends 1920 × 1080i video signals.
[1280
×
720p
*
]
Sends 1280 × 720p video signals.
[720
×
480p
*
]
Sends 720 × 480p video signals.
**
[4:3 PAN SCAN]
[4:3 LETTER BOX]
[16:9]
