Sony DAV-DZ680, Operating Instructions Manual

Page: 63 / 124

T
une
r
63
GB
You can input letters, numbers, and other
symbols for a radio station.
If you make a mistake
Press
C
/
c
repeatedly until the character to
be changed flashes, then press X / x to select
the desired character.
To erase the character, press
C
/
c
repeatedly until the character to be erased
flashes, then press CLEAR.
7
Press .
“COMPLETE” appears in the front panel
display, and the station name is stored.
8
Press SYSTEM MENU.
The system menu turns off.
When the system is set to “TUNER FM,” you
can check the frequency using the front panel
display.
Press DISPLAY.
Each time you press DISPLAY, the display
changes:
1
t
2
t .... t
1
t ....
When the station name is set
1
Station name
Ex. “SONY RADIO”
2 Frequency
Ex. “FM1 87.50”
3
The “FM MODE” setting
Ex. “STEREO”
When the station name is not set
1
Frequency
Ex. “FM1 87.50”
2
The “FM MODE” setting
Ex. “STEREO”
Using the Radio Data
System (RDS)
The Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as station name display.
RDS is available only for FM stations.*
Note
• RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly,
or if the signal strength is weak.
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name* appears in the front
panel display.
* If an RDS broadcast is not received, the station
name may not appear in the front panel display.
Viewing the station name or
frequency in the front panel
display
What is the Radio Data
System?
Receiving RDS broadcasts