Sony DAV-DZ680 Operating Instructions Manual Download Page 61

Page: 61 / 124

une

Presetting Radio
Stations

You can preset 20 FM stations. Before tuning,
make sure to turn down the volume to minimum.

Press FU/– repeatedly until
“TUNER FM” appears in the front panel
display.

Press and hold /– until the
auto scanning starts.

Scanning stops when the system tunes in a
station. “TUNED” and “ST” (stereo
program) appear in the front panel display.

Press SYSTEM MENU.

Press

repeatedly until “MEMORY”

appears in the front panel display.

Press

A preset number appears in the front panel
display.

Press

to select the preset number

you want.

Tip

• You can select the preset number directly by

pressing the number buttons.

Press .

“COMPLETE” appears in the front panel
display, and the station is stored.

Repeat Steps 2 to 7 to store other
stations.

Press SYSTEM MENU.

The system menu turns off.

To change the preset number

Select the desired preset number by pressing
/– (page 62), then perform the
procedure from Step 3.

Tuner

FM 10 : 88.00 MHz

SONY RADIO

Station name

Current band and preset number

Current station

Summary of Contents for DAV-DZ680





























































































































Search results

Summary of Contents for DAV-DZ680

Reviews:

Related manuals for DAV-DZ680

Brands by name

Popular brands

Sony DAV-DZ680, Operating Instructions Manual

Search results

Summary of Contents for DAV-DZ680

Reviews:

Related manuals for DAV-DZ680

Brands by name

Popular brands