Sony DAT DTC-690 Page 9 Operating Instructions Manual Download

Page: 9 / 60

Remote Commander Operation

Each button on the remote commander
functions in the same way as those having
the same name on the front panel.
However, the following operations cannot
be performed using the remote
commander. Use the front panel controls
instead.

• Turning the power on and off
• Selecting digital(optical/coaxial)/analog

input source

• Adjusting the recording level and

balance

• Adjusting the headphones level
• Setting the timer recording/playback
• Selecting the record mode (standard or

long)

• Writing and erasing a start ID, skip ID

and end ID.

The following operations can be performed
only with the remote commander.

• Repeat play
• Skip play
• RMS* play

*RMS: Random Music Sensor

• Designating and canceling a program

number.

• Resetting the linear counter to "0 M 00S"
• Resetting the margin of peak level.
• Changing the display mode.

Installing Batteries

Notes on remote control

• Do not expose the remote sensor on the

deck to strong light such as direct
sunlight, lighting apparatus, etc.

• Do not place any obstructions between

the remote commander and the remote
sensor, or else operations will not be
performed correctly.

• The controllable range is limited. Point

the remote commander directly at the
remote sensor on the deck.

• When remote control operation distance

becomes shorter, the batteries are weak.
Replace both batteries with new ones.

To avoid battery leakage

When the commander will not be used for a
long period of time, remove the batteries to
avoid damage caused by battery leakage
and corrosion.

Battery life

About half a year of normal operation can
be expected when using the Sony SUM-3
(NS) batteries.

Insert two size AA (R6) batteries with correct polarity, and close
the lid.

Location and
Function of Controls

Summary of Contents for DAT DTC-690





























































Search results

Summary of Contents for DAT DTC-690

Reviews:

Related manuals for DAT DTC-690

Brands by name

Popular brands

Sony DAT DTC-690, Operating Instructions Manual

Search results

Summary of Contents for DAT DTC-690

Reviews:

Related manuals for DAT DTC-690

Brands by name

Popular brands