Sony Cyber-shot DSC-W80HDPR, Operating Instructions Manual

Page: 15 / 32

15
6
Insert the paper tray into the
printer.
Insert the paper tray straight in until it reaches
the end.
P Notes
• Do not remove the paper tray during printing.
• To avoid paper jam or malfunctions of the
printer, make sure the following before printing:
– Do not write or type on the print paper. Use
the oil ink pen to write on the paper after
printing. You cannot type on the print paper
using an ink-jet printer, etc.
– Do not attach sticker or stamps on the print
paper.
– Do not fold or bend the print paper.
– Total number of print paper does not exceed
20 sheets.
– Do not print on the used print paper. Printing
an image twice on the same paper will not
make the printed image thicker.
– Use the print paper for this printer only.
– Do not use the print paper ejected without
printed.
P Note on storing the print paper
• Avoid storing the paper with the printed faces
touching each other or in contact with rubber or
plastic products including vinyl chloride or
plasticizer for an extended period of time; color
changes or deterioration of the printed image
may occur.
Connecting
1
Insert the plug of the AC adaptor
(supplied) to the DC IN 24V jack of
the printer.
2
Insert one plug of the AC power
cord to the supplied AC adaptor
and insert the other plug of the
AC power cord to the wall outlet
(wall socket) close by.
The 1 (on/standby) indicator lights in red.
P Note
The socket outlet shall be installed near the
equipment and shall be easily accessible.
AC adaptor
DC plug
To a wall outlet
(wall socket)
AC power cord
(mains lead)