88
Copying images to your computer using the
“PMB”
1
Insert a “Memory Stick Duo”
media with recorded images into
the camera.
• When copying images in the internal
memory, this step is unnecessary.
2
Insert the sufficiently charged
battery pack into the camera, or
connect the camera to a wall
outlet (wall socket) with the AC
Adaptor (sold separately) and the
USB / A/V / DC IN cable for multi-
use terminal (sold separately).
• Use a Type2b-compliant USB / A/V / DC
IN cable (sold separately).
• When you copy images to your computer
using a battery pack with little remaining
charge, copying may fail or image data may
become corrupted if the battery pack shuts
down too soon.
3
Turn on the computer, then press
(Playback) button.
“Connecting...” appears on the screen of the
camera.
When a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
• If “Mass Storage” does not appear, set [USB
Connect] to [Mass Storage] (page 73).
Preparing the camera and the
computer
(Playback) button
Connecting the camera to your
computer
*
is displayed on the screen during the
communication session.
Do not operate the computer while the indicator
is displayed. When the indicator changes to
, you can start using the computer
again.
Cable for
multi-use
terminal
1
To a USB jack
2
To the multi connector
Access
indicators*
