Sony CYBER-SHOT DSC-V1 Operating Instructions Manual Download Page 11

Page: 11 / 132

tti

ng st

Connect the power cord (mains
lead) to the AC Adaptor and
then to a wall outlet (wall
socket).

The /CHG lamp (orange) lights up when
charging begins, and goes off when
charging is completed.

•

After charging the battery pack, disconnect the
AC Adaptor from the DC IN jack of your
camera.

To remove the battery pack

Open the battery/“Memory Stick” cover.
Slide the battery eject lever in the direction
of the arrow, and remove the battery pack.

•

Be careful not to drop the battery pack when
removing it.

Battery remaining indicator

The battery remaining indicator on the LCD
screen shows the remaining shooting or viewing
time.

•

The black portion of the battery remaining
indicator in the illustration shows the actual
remaining time.

•

When you switch the LCD screen on/off, it
takes about one minute for the correct battery
remaining time to appear.

•

The displayed time remaining may not be
correct under certain circumstances or
conditions.

Charging time

Approximate time to charge a completely
discharged battery pack using the AC Adaptor at
a temperature of 25°C (77°F).

Power cord
(mains lead)

To wall outlet (wall socket)

/CHG

/CHG lamp

Battery eject lever

Battery pack

Charging time
(min.)

NP-FC11 (supplied)

Approx. 150

101

S AF

5.0M

min

Summary of Contents for CYBER-SHOT DSC-V1





































































































































Search results

Summary of Contents for CYBER-SHOT DSC-V1

Reviews:

Related manuals for CYBER-SHOT DSC-V1

Brands by name

Popular brands

Sony CYBER-SHOT DSC-V1, Operating Instructions Manual

Search results

Summary of Contents for CYBER-SHOT DSC-V1

Reviews:

Related manuals for CYBER-SHOT DSC-V1

Brands by name

Popular brands