Sony Cyber-shot DSC-U50 Page 11 Operating Instructions Manual Download | Manualshive

Page: 11 / 92

background image

11

G

e

tti

ng st

ar

te

d

Charging time

This represents the time required to charge
fully depleted Nickel-Metal Hydride
batteries using the supplied battery charger
in an environment where the ambient
temperature is 25°C (77°F).

•

It takes about six hours to completely charge
the batteries. The CHARGE lamp may remain
lit longer than six hours, but this is not a
malfunction.

•

If you use the BC-CSQ2 battery charger
supplied with the STAMINA “Super Quick
charge” kit (not supplied), the batteries will
charge faster.
Charging time for Size AAA Nickel-Metal
Hydride batteries
2 batteries: Approx. 1 hour 25 minutes
4 batteries: Approx. 2 hours 50 minutes

Notes on the Nickel-Metal
Hydride batteries

•

If the poles of the Nickel-Metal Hydride
batteries are dirty, the batteries may not charge
properly. Occasionally clean the poles of the
batteries and the terminals of the charger by
wiping them with a dry cloth.

•

Always use the supplied case when transporting
the Nickel-Metal Hydride batteries. If the
positive and negative terminals come into
contact with metallic material and are shorted,
the batteries could overheat or catch fire.

•

At the time of purchase, or when the
Nickel-Metal Hydride batteries have not been
used for a long time, they may not fully charge.
This is typical of this type of battery, and is not
a malfunction. If this happens, repeatedly using
up the batteries fully, and then charging them,
should correct the problem.

•

Even when Nickel-Metal Hydride batteries are
not being used they lose their charge naturally
over time. It is recommended that you recharge
the batteries just before using them.

•

If you recharge Nickel-Metal Hydride batteries
before fully using up the existing charge, the
low battery warning may be displayed sooner
than expected. This is called the “memory
effect.”* If this problem occurs, charging the
batteries only after using up the existing charge
will correct it.

* The “memory effect” – the situation in which

the capacity of the battery is temporarily
lowered.

•

Do not peel off the external seals or damage the
batteries. Never use batteries from which the
seals have been partially or completely
removed, or batteries that have been split in any
way. These may cause leakage, explosion, or
heat-up of the battery, and personal scald or
injury may be caused. These may cause a
malfunction of the battery charger.

Nickel-Metal Hydride
battery

Charging time

NH-AAA-DA × 2 (supplied) Approx. 6 hours

«
...
9
10
11
12
13
...
»

Summary of Contents for Cyber-shot DSC-U50





























































































Reviews:

No comments

Related manuals for Cyber-shot DSC-U50

Brand: GE Pages: 76

POWER series E1486TW

Brand: GE Pages: 93

A Series A1456W

Brand: GE Pages: 85

Whatman Mini-UniPrep G2

Brand: GE Pages: 106

Brand: Samsung Pages: 98

Brand: Samsung Pages: 4

Brand: Samsung Pages: 161

Brand: Samsung Pages: 14

Brand: Samsung Pages: 103

Brand: Samsung Pages: 128

S1050 - Digital Camera - Compact

Brand: Samsung Pages: 100

Brand: Samsung Pages: 8

Brand: Samsung Pages: 96

Brand: Samsung Pages: 103

Brand: Samsung Pages: 104

Brand: Samsung Pages: 173

Brand: Samsung Pages: 2

SL35 - Digital Camera - Compact

Brand: Samsung Pages: 102

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands