Sony Cyber-shot DSC-U40 Operating Instructions Manual Download | Manualshive

Page: 10 / 92

background image

10

Preparing batteries

Acceptable batteries

– HR11/45: HR03 (size AAA) Nickel-

Metal Hydride batteries (2)

NH-AAA-DA (2) (supplied)
NH-AAA-2DA twin-pack (not supplied)

– R03 (size AAA) alkaline batteries (2)

Batteries that cannot be used

Manganese batteries, lithium batteries,
Ni-Cd batteries
When the above batteries are used,
operation is not guaranteed due to possible
voltage drops or other characteristics of the
batteries.
In addition, the battery remaining indicator
is not displayed correctly.

• When alkaline batteries are used, take

note of the following information.
– The battery life is shorter than that of

the supplied Nickel-Metal Hydride
batteries.

– There is a big difference in the

performance of batteries of different
types and of batteries made by
different manufacturers. The battery
life may be quite a bit shorter
depending on the conditions under
which the batteries are used. This is
especially true in low temperatures,
where some batteries are noticeably
weaker.
You may not be able to shoot in
temperatures below 5°C (41°F).

– The battery remaining indicator will

not display the correct information.
The camera may turn off even when
the indicator shows that there is
power remaining, but this is not a
malfunction.

Charging the
batteries

,

Insert Nickel-Metal Hydride
batteries into the battery
charger (supplied) with the
correct po/–.

For details on the supplied battery charger,
see page 85.

• The supplied battery charger is only for

Nickel-Metal Hydride batteries. You
cannot charge any other type of battery.

•

Be sure to charge the Nickel-Metal Hydride
batteries supplied with your camera before
using them for the first time.

•

Connect the battery charger to an easily
accessible wall outlet (wall socket) close by.

1

Getting started

«
...
8
9
10
11
12
...
»

Summary of Contents for Cyber-shot DSC-U40





























































































Reviews:

No comments

Related manuals for Cyber-shot DSC-U40

Palmcorder VM-575

Brand: Quasar Pages: 40

AWF575 - COLOR CAMERA

Brand: Panasonic Pages: 2

AWE600 - COLOR CAMERA

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 4

AWE800 - COLOR CAMERA

Brand: Panasonic Pages: 56

AWE600 - COLOR CAMERA

Brand: Panasonic Pages: 56

Digital Palmcoder Multicam PV-DC152

Brand: Panasonic Pages: 73

Digital Palmcoder PV-DV851

Brand: Panasonic Pages: 72

Brand: Panasonic Pages: 38

AWE560 - COLOR VIDEO CAMERA

Brand: Panasonic Pages: 64

Brand: Panasonic Pages: 57

AWE350P - COLOR CAMERA

Brand: Panasonic Pages: 72

AVCCAM AG-HMC81E

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 100

AWF575 - COLOR CAMERA

Brand: Panasonic Pages: 100

Brand: Panasonic Pages: 84

Brand: Panasonic Pages: 126

Brand: Panasonic Pages: 126

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands