Sony Cyber-Shot DSC-RX10M4, Help Manual

Page: 346 / 593

Help Guide
Digital Still Camera
DSC-RX10M4
Wi-Fi Settings: Access Point Set.
You can register your access point manually. Before starting the procedure, check the SSID name of the access point,
security system, and password. The password may be preset in some devices. For details, see the access point
operating instructions, or consult the access point administrator.
Other setting items
Depending on the status or the setting method of your access point, you may want to set more items.
WPS PIN:
Displays the PIN code you enter into the connected device.
Priority Connection:
Select [On] or [Off].
IP Address Setting:
MENU → (Network) → [Wi-Fi Settings] → [Access Point Set.].
1
Select the access point you want to register.
When the desired access point is displayed on the screen: Select the desired access point.
When the desired access point is not displayed on the screen: Select [Manual Setting] and set the access
point.
If you select [Manual Setting], input the SSID name of the access point, then select the security system.
2
Input the password, and select [OK].
Access points without the mark do not require a password.
3
Select [OK].
4
346