DSC-QX10
4-7
4-4. LENS BLOCK
4-4-1. Removal and Installation
(1) Ornamental Ring A or Barrier Assy Replacing Method
Installation
Removal
5. Disengage the four claws and remove the Barrier Assy.
1. Fit the four claws while inserting the Barrier Lever into the hole and attach the Barrier Assy.
2. Peel off the release papers of the Barrier Tapes.
3. Install the Ornamental Ring A and press it lightly.
1. Turn on the power switch and extend the lens (TELE end).
2. Detach the battery.
3. Pour a solvent such as alcohol to two gaps
A
of the Ornamental Ring A with tweezers or a fine-tipped
stick as shown below.
4. Turn the Ornamental Ring A clockwise and counterclockwise
to detach it.
Solvent
A
Tweezers
Ornamental Ring A
Barrier Assy
Claws
Claws
Barrier Assy
Claws
Claws
Hole
Barrier
Lever
Barrier Tapes
Barrier Assy
Barrier Tapes
Ornamental Ring A
