Sony Cyber-shot DSC-P20, Operating Instructions Manual

Page: 66 / 88

66
Notes on [DATE/TIME]
•
The date and time do not appear on the LCD screen during shooting. These appear during
playback.
• The date and time are not superimposed onto moving images and Clip Motion images.
LCD
BACKLIGHT BRIGHT
x
NORMAL
Displayed only when using your camera
with the battery pack:
Selects the brightness of the LCD backlight.
Lets you set the brightness of the LCD
backlight to [BRIGHT] or [NORMAL].
Selecting [BRIGHT] makes the screen
bright and easy to see when using the
camera outdoors or in other bright locations,
but also uses up the battery charge faster.
BEEP SHUTTER Turns on the shutter sound only. (The shutter
sound is heard when you press the shutter
button.)
x
ON Turns on the beep/shutter sound (when you
press the control button/shutter button).
OFF Turns off the beep/shutter sound.
USB CONNECT PTP Switches the USB mode (page 29).
x
NORMAL
POWER SAVE
x
ON Set to ON to extend the battery life when
operating the camera with batteries.
OFF When POWER SAVE is set to ON, the LCD
screen turns off while the flash is charging
(pages 11, 85).
DEMO
x
ON/STBY Displayed only when you use your camera
with the AC power adaptor. [DEMO] is set
to [STBY] at the factory and the
demonstration starts about 10 minutes after
you have set the mode dial to
or . To
cancel the demonstration, turn off the power.
OFF
Item Setting Description