Sony Cyber-shot DSC-F828 Operating Instructions Manual Download Page 14

Page: 14 / 160

Charging the battery pack

Open the battery/“Memory
Stick” cover.

Slide the cover in the direction of the arrow.

• Be sure to turn off your camera when

charging the battery pack (page 18).

•

Your camera operates with the
“InfoLITHIUM” NP-FM50 battery pack (M
Series) (supplied). You can use only M Series
battery pack (page 146).

Install the battery pack, then
close the battery/“Memory
Stick” cover.

Insert the battery pack with the

mark

facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.

•

The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment to the front side.

Open the jack cover and
connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.

Open the cover in the arrow direction as
illustrated above. Connect the plug with the

mark facing up.

•

Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause a
malfunction.

•

Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.

Battery eject
lever

mark

Jack cover

DC plug

AC Adaptor

Getting started

Summary of Contents for Cyber-shot DSC-F828

































































































































































Search results

Summary of Contents for Cyber-shot DSC-F828

Reviews:

Related manuals for Cyber-shot DSC-F828

Brands by name

Popular brands

Sony Cyber-shot DSC-F828, Operating Instructions Manual

Search results

Summary of Contents for Cyber-shot DSC-F828

Reviews:

Related manuals for Cyber-shot DSC-F828

Brands by name

Popular brands