Sony Cyber-shot DSC-F828 Operating Instructions Manual Download Page 113

Page: 113 / 160

113

En
jo

ages

on
y

our

put

Select [Nothing. I’m finished
working with these pictures],
then click [Next].

The “Completing the Scanner and
Camera Wizard” screen appears.

Click [Finish].

The wizard closes.

•

To continue copying other images, follow the
procedure given under

on page 110 to

disconnect the USB cable and reconnect it.
Then, perform the procedure from Step

again.

Viewing the images on your
computer

Click [Start], then click [My
Documents].

The “My Documents” folder contents
are displayed.

•

This section describes the procedure for
viewing copied images in the “My Documents”
folder.

•

When not using Windows XP, double-click
[My Documents] on the desktop.

•

You can use the “ImageMixer Ver. 1.5 for
Sony” software to view and edit images on your
computer. For details, see the software’s help
files.

Double-click the desired image
file.

The image is displayed.

Summary of Contents for Cyber-shot DSC-F828

































































































































































Search results

Summary of Contents for Cyber-shot DSC-F828

Reviews:

Related manuals for Cyber-shot DSC-F828

Brands by name

Popular brands

Sony Cyber-shot DSC-F828, Operating Instructions Manual

Search results

Summary of Contents for Cyber-shot DSC-F828

Reviews:

Related manuals for Cyber-shot DSC-F828

Brands by name

Popular brands