12
Inserting the “Memory Stick”
Open the “Memory Stick” cover, then press the “Memory Stick” eject button.
Notes
•
Insert the “Memory Stick” firmly, otherwise a message such as “MEMORY STICK ERROR”
will be displayed.
•
Never remove the “Memory Stick” or turn off the power while the access lamp is lit up.
•
You cannot record or edit images on a “Memory Stick” if the erasure prevention switch is set to
the LOCK position.
1
Open the “Memory Stick” cover.
Open the cover while sliding it in the direction of the arrow.
2
Insert the “Memory Stick.”
Insert the “Memory Stick” with the
B
mark facing toward the “Memory Stick”
compartment as illustrated.
3
Close the “Memory Stick” cover.
Removing the “Memory Stick”
Access lamp
“Memory Stick”
OC
Erasure prevention switch
Connector
Label space
