11
GB
2 Inserting the battery pack/a “Memory Stick Duo” (not
supplied)
1
Open the battery/“Memory Stick Duo” cover.
2
Insert the “Memory Stick Duo” (not supplied).
3
Insert the battery pack.
4
Close the battery/“Memory Stick Duo” cover.
[
When there is no “Memory Stick Duo” inserted
The camera records/plays back images using the internal memory (approx. 15 MB).
[
To check the remaining battery charge
Press POWER to turn on and check the remaining battery charge on the LCD screen.
• If you use the NP-FG1 battery pack (not supplied), the minutes also appear after the battery remaining
indicator (
60 Min).
• It takes about one minute until the correct remaining charge indicator appears.
• The remaining charge indicator may not be correct depending on conditions of use and circumstances.
• The Clock Set screen appears when you turn on the camera for the first time (page 13).
With the terminal side
facing the lens, insert the
“Memory Stick Duo” until it
clicks into place.
Battery/“Memory Stick
Duo” cover
ɟ
ɠ
Insert the battery pack while
pressing the battery eject
lever with the tip of the
battery pack.
Remaining
charge
indicator
Status
Sufficient
power
remaining
Battery
almost fully
charged
Battery half
full
Battery low,
recording/
playback
will stop
soon.
Change the battery
with fully charged
one, or charge the
battery. (The warning
indicator flashes.)
